Общая информация
Название Embedded Systems Bare-Metal Programming Ground Up™ (STM32)
Тип
Размер 11.61Гб

Файлы в торренте
Обратите внимание, что наш сайт не размещает какие-либо файлы из списка. Вы не можете скачать эти файлы или скачать torrent-файл.
[TGx]Downloaded from torrentgalaxy.to .txt 585б
0 11б
1 44б
1. Closing Remarks.mp4 3.91Мб
1. Closing Remarks.srt 728б
1. Coding Developing the Liquid Crystal Display (LCD) Driver.mp4 173.39Мб
1. Coding Developing the Liquid Crystal Display (LCD) Driver.srt 30.41Кб
1. Data Types.mp4 38.24Мб
1. Data Types.srt 2.99Кб
1. Downloading CubeIDE.mp4 29.74Мб
1. Downloading CubeIDE.srt 3.97Кб
1. Downloading our Integrated Development Environment (IDE).mp4 16.14Мб
1. Downloading our Integrated Development Environment (IDE).srt 2.72Кб
1. Download Keil uVision 5.mp4 9.94Мб
1. Download Keil uVision 5.srt 2.13Кб
1. Introduction.mp4 25.08Мб
1. Introduction.srt 2.57Кб
1. Introduction to Analog to Digital Conversion.mp4 53.81Мб
1. Introduction to Analog to Digital Conversion.mp4 40.97Мб
1. Introduction to Analog to Digital Conversion.srt 4.42Кб
1. Introduction to Analog to Digital Conversion.srt 4.21Кб
1. Introduction to I2C.mp4 110.79Мб
1. Introduction to I2C.mp4 110.75Мб
1. Introduction to I2C.srt 12.30Кб
1. Introduction to I2C.srt 12.02Кб
1. Introduction to Interrupts.mp4 135.91Мб
1. Introduction to Interrupts.mp4 135.87Мб
1. Introduction to Interrupts.srt 26.74Кб
1. Introduction to Interrupts.srt 25.72Кб
1. Introduction to Serial Peripheral Interface (SPI).mp4 141.45Мб
1. Introduction to Serial Peripheral Interface (SPI).mp4 141.44Мб
1. Introduction to Serial Peripheral Interface (SPI).srt 14.67Кб
1. Introduction to Serial Peripheral Interface (SPI).srt 14.17Кб
1. Notice.html 155б
1. Overview of ARM Cortex-M General Purpose InputOutput Module.mp4 33.15Мб
1. Overview of ARM Cortex-M General Purpose InputOutput Module.mp4 33.14Мб
1. Overview of ARM Cortex-M General Purpose InputOutput Module.srt 9.33Кб
1. Overview of ARM Cortex-M General Purpose InputOutput Module.srt 9.01Кб
1. Overview of General Purpose Timers.mp4 116.25Мб
1. Overview of General Purpose Timers.srt 12.04Кб
1. Overview of the Direct Memory Access (DMA) Module.mp4 134.79Мб
1. Overview of the Direct Memory Access (DMA) Module.srt 16.06Кб
1. Overview of the System Tick Timer.mp4 98.25Мб
1. Overview of the System Tick Timer.mp4 98.22Мб
1. Overview of the System Tick Timer.srt 10.19Кб
1. Overview of the System Tick Timer.srt 9.89Кб
1. Overview of the UART Protocol.mp4 71.90Мб
1. Overview of the UART Protocol.mp4 71.87Мб
1. Overview of the UART Protocol.srt 10.36Кб
1. Overview of the UART Protocol.srt 10.00Кб
1. The RISC Design Philosohpy.mp4 50.06Мб
1. The RISC Design Philosohpy.srt 4.98Кб
10 681.19Кб
10. ARM Cortex-A and Cortex-R.mp4 25.63Мб
10. ARM Cortex-A and Cortex-R.srt 1.97Кб
10. Coding Input capture frequency measurement.mp4 114.56Мб
10. Coding Input capture frequency measurement.srt 19.91Кб
10. Cooprocessor extensions.mp4 16.29Мб
10. Cooprocessor extensions.srt 1.52Кб
100 1.47Мб
101 1.56Мб
102 1.58Мб
103 1.76Мб
104 680.01Кб
105 1.44Мб
106 330.19Кб
107 831.76Кб
108 870.30Кб
109 879.27Кб
11 126.90Кб
11. ARM Cortex-M.mp4 19.98Мб
11. ARM Cortex-M.srt 1.76Кб
11. Coding Configuring the General Purpose Timer for PWM Output.mp4 61.36Мб
11. Coding Configuring the General Purpose Timer for PWM Output.srt 8.11Кб
110 1020.04Кб
111 1.18Мб
112 1.85Мб
113 1.89Мб
114 267.61Кб
115 1.17Мб
116 380.51Кб
117 941.91Кб
118 58.03Кб
119 1.37Мб
12 620.43Кб
120 16.27Кб
121 1.11Мб
122 317.76Кб
123 1.71Мб
124 1.86Мб
125 106.82Кб
126 954.73Кб
127 66.50Кб
128 540.36Кб
129 1.64Мб
13 796.25Кб
130 1.34Мб
14 1.97Мб
15 1.12Мб
16 180.48Кб
17 1.10Мб
18 433.10Кб
19 1.03Мб
2 521.77Кб
2.1 1_simple_spi_write.zip 396.30Кб
2. Analyzing the DS1307 Realtime Clock.mp4 54.80Мб
2. Analyzing the DS1307 Realtime Clock.srt 7.93Кб
2. Coding Configuring the Liquid Crystal Display for 4-bit Data Mode.mp4 93.76Мб
2. Coding Configuring the Liquid Crystal Display for 4-bit Data Mode.srt 13.76Кб
2. Coding Developing a Simple SPI Driver.mp4 72.58Мб
2. Coding Developing a Simple SPI Driver.srt 16.97Кб
2. Coding Developing GPIO Driver Using Information from the Datasheet.mp4 421.89Мб
2. Coding Developing GPIO Driver Using Information from the Datasheet.srt 62.60Кб
2. Coding Developing the ADC Driver.mp4 168.03Мб
2. Coding Developing the ADC Driver.srt 22.14Кб
2. Coding Developing the GPIO Interrupt Driver.mp4 115.83Мб
2. Coding Developing the GPIO Interrupt Driver.srt 20.84Кб
2. Coding Developing the GPIO Output Driver.mp4 173.88Мб
2. Coding Developing the GPIO Output Driver.srt 31.40Кб
2. Coding Developing the System Tick Timer Driver.mp4 103.68Мб
2. Coding Developing the System Tick Timer Driver.srt 17.85Кб
2. Coding Developing the UART Transmitter DMA Driver Pt.1.mp4 76.26Мб
2. Coding Developing the UART Transmitter DMA Driver Pt.1.srt 10.10Кб
2. Coding Developing the UART Transmitter Driver.mp4 196.19Мб
2. Coding Developing the UART Transmitter Driver.srt 29.75Кб
2. Coding Implementing the I2C Init function.mp4 156.97Мб
2. Coding Implementing the I2C Init function.srt 22.34Кб
2. Coding Implementing the SPI GPIO Initialization function.mp4 76.21Мб
2. Coding Implementing the SPI GPIO Initialization function.srt 11.19Кб
2. Coding Writing a GPIO Driver from Scratch (PART I).mp4 193.53Мб
2. Coding Writing a GPIO Driver from Scratch (PART I).srt 46.72Кб
2. Commonly used Timer registers.mp4 38.44Мб
2. Commonly used Timer registers.srt 5.30Кб
2. Commonly used UART registers.mp4 34.56Мб
2. Commonly used UART registers.srt 4.56Кб
2. Installing Keil uVision 5.mp4 9.47Мб
2. Installing Keil uVision 5.srt 11.38Кб
2. Installing our Integrated Development Environment (IDE).mp4 13.07Мб
2. Installing our Integrated Development Environment (IDE).srt 2.76Кб
2. Overview of General Purpose Timers.mp4 116.27Мб
2. Overview of General Purpose Timers.srt 11.77Кб
2. Processor Modes.mp4 65.16Мб
2. Processor Modes.srt 6.61Кб
2. Setting Up STM32CubeIDE.mp4 48.58Мб
2. Setting Up STM32CubeIDE.srt 7.58Кб
2. The ARM Design Philosophy.mp4 41.78Мб
2. The ARM Design Philosophy.srt 3.82Кб
2. Understanding ADC Independents Modes.mp4 104.01Мб
2. Understanding ADC Independents Modes.srt 11.08Кб
2. Understanding External Interrupts.mp4 69.06Мб
2. Understanding External Interrupts.srt 11.09Кб
20 22.00Кб
21 1005.68Кб
22 1.35Мб
23 559.46Кб
24 578.47Кб
25 129.66Кб
26 325.62Кб
27 94.52Кб
28 133.14Кб
29 1.21Мб
3 360.50Кб
3. ARM7TDMI Registers.mp4 113.13Мб
3. ARM7TDMI Registers.srt 9.46Кб
3. Coding Configuring the SPI Parameters.mp4 85.67Мб
3. Coding Configuring the SPI Parameters.srt 9.75Кб
3. Coding Controlling GPIO Outputs using the Bit SetReset Register (BSRR).mp4 38.53Мб
3. Coding Controlling GPIO Outputs using the Bit SetReset Register (BSRR).srt 6.43Кб
3. Coding Developing an I2C Driver.mp4 155.02Мб
3. Coding Developing an I2C Driver.srt 28.88Кб
3. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part I).mp4 237.65Мб
3. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part I).srt 34.68Кб
3. Coding Developing the ADC Single Conversion Driver.mp4 266.09Мб
3. Coding Developing the ADC Single Conversion Driver.srt 36.58Кб
3. Coding Developing the General Purpose Timer Driver.mp4 78.55Мб
3. Coding Developing the General Purpose Timer Driver.srt 15.40Кб
3. Coding Developing the GPIO Interrupt Driver.mp4 166.88Мб
3. Coding Developing the GPIO Interrupt Driver.srt 21.44Кб
3. Coding Developing the UART Driver Using Information from the Datasheet.mp4 289.47Мб
3. Coding Developing the UART Driver Using Information from the Datasheet.srt 36.78Кб
3. Coding Developing the UART Transmitter DMA Driver Pt.2.mp4 206.91Мб
3. Coding Developing the UART Transmitter DMA Driver Pt.2.srt 26.01Кб
3. Coding Implementing the I2C Byte Read function.mp4 126.15Мб
3. Coding Implementing the I2C Byte Read function.srt 17.49Кб
3. Coding Reading the CPU Temperature with the ADC and Displaying it with the UART.mp4 155.98Мб
3. Coding Reading the CPU Temperature with the ADC and Displaying it with the UART.srt 25.64Кб
3. Coding Testing the GPIO Interrupt Driver.mp4 72.83Мб
3. Coding Testing the GPIO Interrupt Driver.srt 11.82Кб
3. Coding Testing the UART Transmitter Driver.mp4 60.60Мб
3. Coding Testing the UART Transmitter Driver.srt 9.04Кб
3. Coding Writing a GPIO Driver from Scratch (PART II).mp4 119.28Мб
3. Coding Writing a GPIO Driver from Scratch (PART II).srt 25.05Кб
3. Commonly used Timer registers.mp4 38.42Мб
3. Commonly used Timer registers.srt 5.10Кб
3. Embedded Systems with ARM Processors.mp4 43.50Мб
3. Embedded Systems with ARM Processors.srt 3.89Кб
3. Getting the right Documentation for Bare-Metal Development.mp4 40.01Мб
3. Getting the right Documentation for Bare-Metal Development.srt 7.39Кб
3. Notice.html 193б
3. Quick Notice.html 251б
3. Understanding the BSRR Register.mp4 15.90Мб
3. Understanding the BSRR Register.srt 1.88Кб
30 1.85Мб
31 199.08Кб
32 1.73Мб
33 733.74Кб
34 148.67Кб
35 1.73Мб
36 1.75Мб
37 174.46Кб
38 1.44Мб
39 889.24Кб
4 1.09Мб
4. ARM7TDMI Vector Table.mp4 35.34Мб
4. ARM7TDMI Vector Table.srt 3.01Кб
4. ARM Bus Technology and AMBA Bus Protocol.mp4 32.82Мб
4. ARM Bus Technology and AMBA Bus Protocol.srt 2.68Кб
4. Coding Controlling GPIO using the BSRR Register.mp4 142.65Мб
4. Coding Controlling GPIO using the BSRR Register.srt 18.25Кб
4. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part II).mp4 83.62Мб
4. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part II).srt 12.13Кб
4. Coding Developing the ADC Continuous Conversion Driver.mp4 30.11Мб
4. Coding Developing the ADC Continuous Conversion Driver.srt 4.11Кб
4. Coding Developing the GPIO Input Driver.mp4 77.66Мб
4. Coding Developing the GPIO Input Driver.srt 11.34Кб
4. Coding Developing the System Tick Timer Driver.mp4 43.68Мб
4. Coding Developing the System Tick Timer Driver.srt 7.40Кб
4. Coding Developing the Timer Output Compare Driver.mp4 163.82Мб
4. Coding Developing the Timer Output Compare Driver.srt 20.19Кб
4. Coding Developing the UART Receiver Interrupt Driver.mp4 106.59Мб
4. Coding Developing the UART Receiver Interrupt Driver.srt 13.89Кб
4. Coding Implementing the I2C Burst Read function.mp4 54.48Мб
4. Coding Implementing the I2C Burst Read function.srt 8.24Кб
4. Coding Implementing the SPI Transmit.mp4 55.93Мб
4. Coding Implementing the SPI Transmit.srt 7.53Кб
4. Coding Locating the Ports and Pins of Components on the Nucleo board.mp4 46.67Мб
4. Coding Locating the Ports and Pins of Components on the Nucleo board.srt 9.43Кб
4. Coding Retargeting printf.mp4 18.89Мб
4. Coding Retargeting printf.srt 3.39Кб
4. Coding Testing the UART Transmitter DMA Driver.mp4 117.85Мб
4. Coding Testing the UART Transmitter DMA Driver.srt 17.10Кб
4. Coding Working with Multiple GPIO Interrupts.mp4 157.58Мб
4. Coding Working with Multiple GPIO Interrupts.srt 24.32Кб
4. Further discussion on UART Alternate Function configuration.mp4 73.92Мб
4. Further discussion on UART Alternate Function configuration.srt 9.19Кб
4. Installing Packages.mp4 42.18Мб
4. Installing Packages.srt 6.96Кб
4. Installing Packs.mp4 44.94Мб
4. Installing Packs.srt 6.00Кб
40 921.66Кб
41 1.21Мб
42 1.25Мб
43 394.24Кб
44 1.41Мб
45 1.92Мб
46 1.99Мб
47 328.59Кб
48 1.02Мб
49 97.01Кб
5 1.87Мб
5. ARM Cortex-M Registers.mp4 63.30Мб
5. ARM Cortex-M Registers.srt 5.67Кб
5. Changing the Compiler.mp4 6.36Мб
5. Changing the Compiler.srt 2.80Кб
5. Coding Defining Addresses of Modules using information from the Documentation.mp4 122.27Мб
5. Coding Defining Addresses of Modules using information from the Documentation.srt 24.50Кб
5. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part III).mp4 139.87Мб
5. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part III).srt 16.99Кб
5. Coding Developing the ADC Interrupt Driver.mp4 70.43Мб
5. Coding Developing the ADC Interrupt Driver.srt 10.21Кб
5. Coding Developing the Timer Input Capture Driver.mp4 188.60Мб
5. Coding Developing the Timer Input Capture Driver.srt 23.62Кб
5. Coding Developing the UART Interrupt Driver.mp4 102.98Мб
5. Coding Developing the UART Interrupt Driver.srt 15.45Кб
5. Coding Implementing the I2C Burst Write function.mp4 45.39Мб
5. Coding Implementing the I2C Burst Write function.srt 5.75Кб
5. Coding Implementing the SPI Receive.mp4 44.39Мб
5. Coding Implementing the SPI Receive.srt 6.57Кб
5. Coding Making the Driver more Modular.mp4 30.15Мб
5. Coding Making the Driver more Modular.srt 4.31Кб
5. Coding Reading GPIO Inputs.mp4 66.72Мб
5. Coding Reading GPIO Inputs.srt 12.36Кб
5. Coding Receiving Data with the UART.mp4 162.90Мб
5. Coding Receiving Data with the UART.srt 21.90Кб
5. Further discussion on System Tick Registers.mp4 28.83Мб
5. Further discussion on System Tick Registers.srt 4.17Кб
5. Memory.mp4 111.10Мб
5. Memory.srt 9.36Кб
5. Overview.mp4 109.61Мб
5. Overview.srt 24.22Кб
50 151.71Кб
51 1.59Мб
52 1.75Мб
53 1.78Мб
54 248.19Кб
55 661.61Кб
56 337.01Кб
57 387.36Кб
58 1.45Мб
59 346.87Кб
6 914.74Кб
6.1 1_spi_st7735_driver.zip 4.66Мб
6. ARM Cortex-M Vector Table.mp4 17.69Мб
6. ARM Cortex-M Vector Table.srt 1.64Кб
6. Coding Configuring the ADXL345 Accelerometer using the I2C driver.mp4 185.33Мб
6. Coding Configuring the ADXL345 Accelerometer using the I2C driver.srt 24.15Кб
6. Coding Configuring the ADXL345 Accelerometer using the SPI Driver.mp4 101.91Мб
6. Coding Configuring the ADXL345 Accelerometer using the SPI Driver.srt 14.67Кб
6. Coding Creating a Delay Function using the System Tick Timer.mp4 72.34Мб
6. Coding Creating a Delay Function using the System Tick Timer.srt 13.68Кб
6. Coding Creating required Registers using Information from Documentation.mp4 125.81Мб
6. Coding Creating required Registers using Information from Documentation.srt 21.59Кб
6. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part IV).mp4 204.13Мб
6. Coding Developing an SPI Driver for the ST7735 Graphics LCD (Part IV).srt 26.81Кб
6. Coding Developing the System Tick Interrupt Driver.mp4 59.57Мб
6. Coding Developing the System Tick Interrupt Driver.srt 11.63Кб
6. Coding Developing the Systick Interrupt Driver.mp4 54.03Мб
6. Coding Developing the Systick Interrupt Driver.srt 6.97Кб
6. Coding Developing the UART Receiver Driver.mp4 67.95Мб
6. Coding Developing the UART Receiver Driver.srt 8.28Кб
6. Coding Two-way UART Communication.mp4 139.68Мб
6. Coding Two-way UART Communication.srt 22.05Кб
6. Notice.html 172б
6. Peripherals.mp4 33.68Мб
6. Peripherals.srt 2.96Кб
60 1.74Мб
61 1.79Мб
62 85.77Кб
63 1.17Мб
64 1.42Мб
65 1.66Мб
66 106.34Кб
67 129.63Кб
68 1.57Мб
69 966.86Кб
7 1.81Мб
7. ARM Data Flow Model.mp4 50.59Мб
7. ARM Data Flow Model.srt 4.56Кб
7. Coding Configuring Pins using the Registers we Created.mp4 52.84Мб
7. Coding Configuring Pins using the Registers we Created.srt 10.59Кб
7. Coding Developing the General Purpose Timer (GPTM) Driver.mp4 106.08Мб
7. Coding Developing the General Purpose Timer (GPTM) Driver.srt 15.85Кб
7. Coding Developing the General Purpose Timer Interrupt Driver.mp4 100.41Мб
7. Coding Developing the General Purpose Timer Interrupt Driver.srt 15.03Кб
7. Coding Developing the Timer Interrupt Driver.mp4 52.96Мб
7. Coding Developing the Timer Interrupt Driver.srt 7.76Кб
7. Coding Testing our ADXL345 Driver.mp4 20.63Мб
7. Coding Testing our ADXL345 Driver.srt 3.39Кб
7. Coding Testing the ADXL345 Accelerometer using the I2C driver.mp4 93.35Мб
7. Coding Testing the ADXL345 Accelerometer using the I2C driver.srt 13.22Кб
7. Coding Testing the UART Receiver Driver.mp4 33.19Мб
7. Coding Testing the UART Receiver Driver.srt 5.00Кб
7. Von Nuemann and Harvard architecture.mp4 52.53Мб
7. Von Nuemann and Harvard architecture.srt 4.72Кб
70 51.06Кб
71 1.28Мб
72 857.37Кб
73 714.90Кб
74 658.95Кб
75 1.40Мб
76 438.30Кб
77 456.24Кб
78 74.99Кб
79 1.20Мб
8 480.19Кб
8. Cache and Tightly Couple Memory.mp4 48.26Мб
8. Cache and Tightly Couple Memory.srt 4.49Кб
8. Coding Configuring the General Purpose Timer for Output Compare.mp4 101.85Мб
8. Coding Configuring the General Purpose Timer for Output Compare.srt 11.62Кб
8. Coding Creating Registers from Structure Members.mp4 173.22Мб
8. Coding Creating Registers from Structure Members.srt 23.01Кб
8. The Pipeline.mp4 57.55Мб
8. The Pipeline.srt 5.29Кб
80 1.52Мб
81 1.97Мб
82 190.96Кб
83 1.04Мб
84 1.16Мб
85 1.47Мб
86 1.41Мб
87 1.94Мб
88 1.42Мб
89 1.74Мб
9 1.40Мб
9. ARM Processor Family.mp4 23.94Мб
9. ARM Processor Family.srt 2.32Кб
9. Coding Configuring the General Purpose Timer for Input Capture.mp4 201.11Мб
9. Coding Configuring the General Purpose Timer for Input Capture.srt 24.82Кб
9. Memory Management extensions.mp4 33.00Мб
9. Memory Management extensions.srt 2.86Кб
9. Notice.html 279б
90 1.33Мб
91 629.22Кб
92 1.06Мб
93 1.61Мб
94 322.74Кб
95 508.64Кб
96 1.82Мб
97 224.80Кб
98 1.03Мб
99 1.99Мб
TutsNode.com.txt 63б
Статистика распространения по странам
США (US) 5
Россия (RU) 4
Великобритания (GB) 3
Тунис (TN) 2
Нидерланды (NL) 2
Беларусь (BY) 1
Израиль (IL) 1
Кипр (CY) 1
Бангладеш (BD) 1
Испания (ES) 1
Польша (PL) 1
Индия (IN) 1
Венгрия (HU) 1
Тринидад и Тобаго (TT) 1
Ирак (IQ) 1
Украина (UA) 1
Финляндия (FI) 1
Пакистан (PK) 1
Канада (CA) 1
Всего 30
Список IP Полный список IP-адресов, которые скачивают или раздают этот торрент